UHF880 Class

Initializes a new instance of the UHF880 class

Initializes a new instance of the UHF880 class

Gets the error code the the result of invoking method.

Gets the error reason description.

Gets a value indicating whether Frequency is locked.

Gets a value indicating whether this reader has BLE module.

Gets a value indicating whether this reader supports BLE keyboard.

Gets a value indicating whether this reader has Wi-Fi module.

Gets a value indicating the reader is connected or disconnected.

Connection string used to connect reader.

Reader Name.

Gets the version of SDK library (GIGATMS.UHF.dll).

Connects to device using specified port name and settings.

Used by manufacture only.

Close connection.

Gets all UHF880 Settings. Any modification to the settings object will take effect after calling SetAllSettings(Boolean, Settings).

Gets the firmware version of the reader.

Lock or unlock specified memory.

Reads tag raw data from given memory bank.

Sets all UHF880 Settings.

Starts the process of tag inventory using specified trigger source.

Stops the process of tag inventory.

Writes EPC into tag. Note this API will automatically calculate and write the Gen2 PC based on the EPC length. UMI, XI, T, bits will set to 0. AFI or Attribute byte will set to 0. If you want to write EPC with specified T, AFI or Attribute, call WriteTag(String, MemoryBank, Int32, Byte) instead.

Writes raw data into tag.

Indicates when the reader has connected or disconnected.

Notify when reader error occurred.

Notifies the application that an error has been detected and a suitable response is necessary to process the error condition.

Indicates that the reader has inventoried a new tag.

Indicates that the reader reads a new tag.

Indicates that an inventoried tag is removed.

Indicates that an inventoried tag is removed.