SLR810 Class |
Provides APIs to control SLR810 reader and access the Settings.
Inheritance HierarchyNamespace: com.gigatms
Assembly: GIGATMS.UHF (in GIGATMS.UHF.dll) Version: 2.16.9.0 (2.16.9.0)
SyntaxThe SLR810 type exposes the following members.
Constructors| Name | Description | |
|---|---|---|
 | SLR810 |
Initializes a new instance of the SLR810 class.
|
| SLR810(Int32, Int32) |
Initializes a new instance of the SLR810 class with timeout and retry times.
|
Properties| Name | Description | |
|---|---|---|
 | DeviceName | Obsolete. (Inherited from UHF.) |
| ErrorCode |
Gets the error code the the result of invoking method.
(Inherited from UHF.) |
| ErrorMessage |
Gets the error reason description.
(Inherited from UHF.) |
| FrequencyLocked |
Gets a value indicating whether Frequency is locked.
(Inherited from UHF.) |
| HasBle |
Gets a value indicating whether this reader has BLE module.
(Inherited from UHF.) |
| HasBleKeyboard |
Gets a value indicating whether this reader supports BLE keyboard.
(Inherited from UHF.) |
| HasWiFi |
Gets a value indicating whether this reader has Wi-Fi module.
(Inherited from UHF.) |
| IsConnected |
Gets a value indicating the reader is connected or disconnected.
(Inherited from UHF.) |
| PortName |
Connection string used to connect reader.
(Inherited from UHF.) |
| ProductName |
Reader Name.
(Inherited from UHF.) |
| SdkVersion |
Gets the version of SDK library (GIGATMS.UHF.dll).
(Inherited from UHF.) |
Methods| Name | Description | |
|---|---|---|
| Connect |
Connects to device using specified port name and settings.
(Inherited from UHF.) |
| ControlBuzzer |
Make reader buzzer to sound a specified beep pattern.
|
| DirectIoMultiAck |
Used by manufacture only.
(Inherited from UHF.) |
| Disconnect |
Close connection.
(Inherited from UHF.) |
| GetAllSettings |
Gets all SLR810 Settings.
Any modification to the settings object will take effect after calling SetAllSettings(Boolean, Settings).
|
| GetFirmwareVersion |
Gets the firmware version of the reader.
(Inherited from UHF.) |
| GetInventoryActiveMode |
Gets the operation mode of inventory a tag.
|
| InventoryTags | (Inherited from UHF.) |
| ReadTag(String, MemoryBank, Int32, Int32) |
Reads tag raw data from given memory bank.
|
| ReadTag(String, String, MemoryBank, Int32, Int32) |
Reads raw data from tag with specified EPC.
|
| SetAllSettings |
Sets all SLR810 Settings.
|
| SetInventoryActiveMode |
Sets the operation mode of inventory a tag.
|
| StartInventory |
Starts the process of tag inventory using specified trigger source.
(Inherited from UHF.) |
| StopInventory |
Stops the process of tag inventory.
(Inherited from UHF.) |
| WriteEPC(String, Byte) |
Writes EPC into tag.
Note this API will automatically calculate and write the Gen2 PC based on the EPC length.
UMI, XI, T, bits will set to 0.
AFI or Attribute byte will set to 0.
If you want to write EPC with specified T, AFI or Attribute, call WriteTag(String, MemoryBank, Int32, Byte) instead.
|
| WriteEPC(String, String, Byte) |
Writes EPC into tag with specified EPC.
Note this API will automatically calculate and write the Gen2 PC based on the EPC length.
UMI, XI, T, bits will set to 0.
AFI or Attribute byte will set to 0.
If you want to write EPC with specified T, AFI or Attribute, call WriteTag(String, String, MemoryBank, Int32, Byte) instead.
|
| WriteTag(String, MemoryBank, Int32, Byte) |
Writes raw data into tag.
|
| WriteTag(String, String, MemoryBank, Int32, Byte) |
Writes raw data into tag with specified EPC.
|
Events| Name | Description | |
|---|---|---|
 | OnConnectionStateChanged |
Indicates when the reader has connected or disconnected.
(Inherited from UHF.) |
| OnError |
Notify when reader error occurred.
(Inherited from UHF.) |
| OnErrorOccurred | Obsolete.
Notifies the application that an error has been detected and a suitable response is necessary to process the error condition.
(Inherited from UHF.) |
| OnTagPresented |
Indicates that the reader has inventoried a new tag.
(Inherited from UHF.) |
| OnTagPresentedEx |
Indicates that the reader reads a new tag.
(Inherited from UHF.) |
| OnTagRemoved |
Indicates that an inventoried tag is removed.
(Inherited from UHF.) |
| OnTagRemovedEx |
Indicates that an inventoried tag is removed.
(Inherited from UHF.) |
See Also