com.gigatms.Parameters.UR0250 Namespace |
Classes| Class | Description | |
|---|---|---|
 | GPIOState |
Indicates the status of all GPIOs.
|
| IOEventArgs |
Digital input or output new state.
This class is used with the OnIOStateChanged event.
|
| Settings |
All settings of UR0250.
|
| TagMainKeyboardData |
A settings for UR0250 to control inventory data.
|
| TagMainRawDataEvent |
A settings for UR0250 to control inventory data.
|
Enumerations| Enumeration | Description | |
|---|---|---|
 | ActiveMode |
Specifies the operation mode of inventory a tag.
|
| BuzzerAction |
Specifies the buzzer beep pattern.
|
| BuzzerOperationMode |
Specifies the beep mode of buzzer.
|
| IONumber |
Specifies the number of digital IO pin for selecting to access.
|
| KeyboardSimulation |
Specifies the interface of keyboard output.
|
| LinkFrequencyType |
Specifies the link frequency of tag backscatter (tag to reader).
|
| OutputInterface |
Specifies the data ouput interface.
|
| RfSensitivityLevel |
Specifies the RF input sensitivity level.
|
| RxDecodeType |
Specifies the encoding of backscattered data (tag to reader).
|
| ScanMode |
UR0250 Scan modes include automatic inventory or externally triggered inventory.
|
| Session |
Session is a flag that indicates whether a tag may respond to an reader. Tags maintain a separate inventoried
flag for each of four sessions.
|
| State |
Specifies the command trigger state.
Works with reader models with external trigger inventory function.
|
| Target |
Target indicates whether the Select modifies a Tag’s SL flag or its inventoried flag, and in the case of
inventoried it further specifies one Of four sessions.
|
| TextEPCBase |
Convert number base of keyboard output to base 10 or base 16.
|
| TextOutputOptions |
The output item options when output tag data with keyboard.
|
| TriggerType |
Specifies the way of triggering to turn on the RF power to read tag data.
|