TS50 Class

Initializes a new instance of the TS50 class.

Initializes a new instance of the TS50 class with timeout and retry times.

Gets the error code the the result of invoking method.

Gets the error reason description.

Gets a value indicating whether Frequency is locked.

Gets a value indicating whether this reader has BLE module.

Gets a value indicating whether this reader supports BLE keyboard.

Gets a value indicating whether this reader has Wi-Fi module.

Gets a value indicating the reader is connected or disconnected.

Connection string used to connect reader.

Reader Name.

Gets the version of SDK library (GIGATMS.UHF.dll).

Connects to device using specified port name and settings.

Make reader buzzer to sound a specified beep pattern.

Used by manufacture only.

Close connection.

Gets all TS50 Settings. Any modification to the settings object will take effect after calling SetAllSettings(Boolean, Settings).

Gets the firmware version of the reader.

Gets the operation mode of inventory a tag.

Gets tag Impinj's QT technology settings. Only works for Impinj tag.

Lock or unlock specified memory.

Lock or unlock specified memory.

Reads tag raw data from given memory bank.

Reads raw data from tag with specified EPC.

Sets all TS50 Settings.

Sets the operation mode of inventory a tag.

Sets the keyboard output format. [Prefix]Output1[FieldSeparator]Output2[Suffix][Delimiter].

Sets the output tag decoded data when inventory a tag.

When a tag is inventoried, TS50 will try to decode its EPC accroding to the Filter form priority 1 to priority 4. Decode format priority is fixed, but each decode format can be selected or deselected (must select at least one format). Priority3_RawData include additional options include PC, EPC, TID. Affect Settings: Filter, BarcodeReadFormat, TagMemorySelection.

Sets tag Impinj's QT technology settings. Only works for Impinj tag.

Sets tag Impinj range settings. Only works for Impinj tag.

Sets tag Gen2 untraceable.

Starts the process of tag inventory using specified trigger source.

Stops the process of tag inventory.

Writes EPC into tag. Note this API will automatically calculate and write the Gen2 PC based on the EPC length. UMI, XI, T, bits will set to 0. AFI or Attribute byte will set to 0. If you want to write EPC with specified T, AFI or Attribute, call WriteTag(String, MemoryBank, Int32, Byte) instead.

Writes EPC into tag with specified EPC. Note this API will automatically calculate and write the Gen2 PC based on the EPC length. UMI, XI, T, bits will set to 0. AFI or Attribute byte will set to 0. If you want to write EPC with specified T, AFI or Attribute, call WriteTag(String, String, MemoryBank, Int32, Byte) instead.

Writes raw data into tag.

Writes raw data into tag with specified EPC.

Encode GTIN barcode to SGTIN-198 and write into tag's EPC bank.

Encode GTIN barcode to SGTIN-96 format and write into tag's EPC bank.

Encode GTIN barcode to SGTIN-96 + EAS format (GIGA-TMS) and write into tag's EPC bank.

Encode GTIN barcode to UDC format (GIGA-TMS) and write into tag's EPC bank.

Encode GTIN barcode to SGTIN-198 and write into specified tag's EPC bank.

Encode GTIN barcode to SGTIN-96 format and write into specified tag's EPC bank.

Encode GTIN barcode to SGTIN-96 + EAS format (GIGA-TMS) and write into specified tag's EPC bank.

Encode GTIN barcode to UDC format (GIGA-TMS) and write into specified tag's EPC bank.

Indicates when the reader has connected or disconnected.

Notify when reader error occurred.

Notifies the application that an error has been detected and a suitable response is necessary to process the error condition.

Indicates that the reader has inventoried a new tag.

Indicates that the reader reads a new tag.

Indicates that an inventoried tag is removed.

Indicates that an inventoried tag is removed.