 | com.gigatms.Parameters Namespace |
The com.gigatms.Parameters namespace contains enumerations for reader settings.
Classes| Class | Description | |
|---|---|---|
 | BLESettings |
BLE settings.
|
| ClientSocket |
Presents the information about the socket of incoming connection.
|
| DecodedTagData |
Presents the tag data information.
|
| DecodedTagDataDataInfo |
Presents the tag data information.
|
| DecodedTagDataDeviceSerialNumberInfo |
Presents the device serial number information.
|
| DecodedTagDataTagSerialNumberInfo |
Presents the tag serial number information.
The tag serial number may be idential to the barcode attached to the tag
|
| DecodedTagDataTIDInfo |
Presents the TID information that reads from the TID band of tag memory.
|
| IOEventArgs |
Digital input or output new state.
|
| TagInformationFormat |
Presents the tag information.
|
Enumerations| Enumeration | Description | |
|---|---|---|
 | ActiveMode |
Specifies the operation mode of reading a tag.
|
| BLEMode |
Specifies the BLE mode
|
| BLEService |
Specifies the BLE Service
|
| BuzzerAction |
Specifies the pattern of sounding buzzer
|
| BuzzerOperationMode |
Specifies the repeats mode of sounding the buzzer.
|
| CommModuleType |
Specifies the communication module
|
| ConnectionStates |
Indicate the connection state of a reader.
|
| DecodedTagDataDataInfoDataType | |
| DecodedTagDataDecodedType |
Specifies the type of decoding tag data.
|
| ErrorCode |
Specifies the result of invoking method.
|
| EventType |
Specifies the event command type.
|
| IONumber |
Specifies the number of IO pin for selecting to access.
|
| IOState |
Specifies the state of I/O pin.
|
| KeyboardSimulation |
Specifies the interface of keyboard output.
|
| LinkFrequencyType |
Specifies the link frequency of tag backscatter (tag to reader).
|
| LockAction |
Specifies the action of locling memory.
|
| MemoryBank |
Specifies the memory bank of tag.
|
| MemoryBankSelection |
Specifies the output tag data source.
|
| OutputInterface |
Specifies the data ouput interface.
|
| PostDataDelimiter |
Specifies the delimeter append to the end of output data.
|
| RfSensitivityLevel |
Specifies the RF input sensitivity level.
|
| RxDecodeType |
Specifies the encoding of backscattered data (tag to reader).
|
| Session |
Session is a flag that indicates whether a tag may respond to an reader. Tags maintain a separate inventoried
flag for each of four sessions.
|
| State |
Specifies the state.
|
| TagDataEncodeType |
Specifies the type of decoding tag data.
|
| TagPresentedType |
SpecifSpecifies the tag data format received at OnTagPresented Event.
|
| Target |
Target indicates whether the Select modifies a Tag’s SL flag or its inventoried flag, and in the case of
inventoried it further specifies one Of four sessions.
|
| TriggerType |
Specifies the way of triggering to turn on the RF power to read tag data.
|