- SaveReadingDataSetting - Class in com.t3protocol.gnetplus.command.setting
-
- SaveReadingDataSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.SaveReadingDataSetting
-
- SaveReadingDataSetting(Enable) - Constructor for class com.t3protocol.gnetplus.command.setting.SaveReadingDataSetting
-
- SaveReadingDataSettingTest - Class in com.t3protocol.gnetplus.command.setting
-
- SaveReadingDataSettingTest() - Constructor for class com.t3protocol.gnetplus.command.setting.SaveReadingDataSettingTest
-
- ScanChannel - Class in com.util.io.scanner.channel
-
- ScanChannel() - Constructor for class com.util.io.scanner.channel.ScanChannel
-
- ScanDebugCallback - Interface in com.util.io.debug
-
- ScannerCallback - Interface in com.util.io.scanner
-
The callback interface getting scanning operation result.
- ScanTagTimeoutSetting - Class in com.t3protocol.gnetplus.command.setting
-
- ScanTagTimeoutSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.ScanTagTimeoutSetting
-
- ScanTagTimeoutSetting(byte) - Constructor for class com.t3protocol.gnetplus.command.setting.ScanTagTimeoutSetting
-
- ScreenMenuSelectionSetting - Class in com.t3protocol.gnetplus.command.setting
-
- ScreenMenuSelectionSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.ScreenMenuSelectionSetting
-
- ScreenMenuSelectionSetting(LinkedHashSet<OperationMenu>) - Constructor for class com.t3protocol.gnetplus.command.setting.ScreenMenuSelectionSetting
-
- ScreenMenuSelectionSettingTest - Class in com.t3protocol.gnetplus.command.setting
-
- ScreenMenuSelectionSettingTest() - Constructor for class com.t3protocol.gnetplus.command.setting.ScreenMenuSelectionSettingTest
-
- SelectedCondition - Class in com.t3protocol.gnetplus.parameters
-
- SelectedCondition(SelectOption, int, byte[]) - Constructor for class com.t3protocol.gnetplus.parameters.SelectedCondition
-
- SelectedCondition_selectDataWithLength3_throwErrorParameter() - Method in class com.t3protocol.gnetplus.parameters.SelectedConditionTest
-
- SelectedConditionTest - Class in com.t3protocol.gnetplus.parameters
-
- SelectedConditionTest() - Constructor for class com.t3protocol.gnetplus.parameters.SelectedConditionTest
-
- SelectOption - Enum in com.t3protocol.gnetplus.parameters
-
- self() - Method in class com.aur.aur720B.Aur720B.Callback
-
- self() - Method in class com.util.io.device.BaseDevice.Callback
-
- self() - Method in class com.util.protocol.api.ApiCommands.Builder
-
- self() - Method in class com.util.protocol.api.BaseApiCommands.Builder
-
- send(byte[]) - Method in class com.util.io.device.BaseDevice
-
- send(byte[], String) - Method in class com.util.io.device.BaseDevice
-
- send(T) - Method in class com.util.io.device.BaseDevice
-
- send(byte[]) - Method in class com.util.io.device.transceiver.ble.BleTransceiver
-
- send(byte[], String) - Method in class com.util.io.device.transceiver.ble.BleTransceiver
-
- send(byte[], UUID) - Method in class com.util.io.device.transceiver.ble.BleTransceiver
-
- send(byte[]) - Method in class com.util.io.device.transceiver.tcp.TcpTransceiver
-
- send(byte[], String) - Method in class com.util.io.device.transceiver.tcp.TcpTransceiver
-
- send(byte[]) - Method in class com.util.io.device.transceiver.Transceiver
-
- send(byte[], String) - Method in class com.util.io.device.transceiver.Transceiver
-
- send(byte[]) - Method in class com.util.io.device.transceiver.usb.UsbTransceiver
-
- send(byte[], String) - Method in class com.util.io.device.transceiver.usb.UsbTransceiver
-
- SEND_THREAD_POOL_SIZE - Static variable in class com.util.io.device.transceiver.usb.UsbTransceiver
-
- SerialNumberDelimiterSetting - Class in com.t3protocol.gnetplus.command.setting
-
- SerialNumberDelimiterSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.SerialNumberDelimiterSetting
-
- SerialNumberDelimiterSetting(byte[]) - Constructor for class com.t3protocol.gnetplus.command.setting.SerialNumberDelimiterSetting
-
- SerialNumberDelimiterSettingTest - Class in com.t3protocol.gnetplus.command.setting
-
- SerialNumberDelimiterSettingTest() - Constructor for class com.t3protocol.gnetplus.command.setting.SerialNumberDelimiterSettingTest
-
- Session - Enum in com.t3protocol.gnetplus.parameters
-
- SessionSetting - Class in com.t3protocol.gnetplus.command.setting
-
- SessionSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.SessionSetting
-
- SessionSetting(Session) - Constructor for class com.t3protocol.gnetplus.command.setting.SessionSetting
-
- SessionSettingTest - Class in com.t3protocol.gnetplus.command.setting
-
- SessionSettingTest() - Constructor for class com.t3protocol.gnetplus.command.setting.SessionSettingTest
-
- setAccessPassword(byte[]) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to define the Access Password that is used to unlock tag data.
- setBleGattUuid(UUID, UUID, UUID, UUID, UUID, UUID) - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- setBleKbOutputPrefix(byte[]) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to define the prefix of output data.
- setBleKbOutputSerialNumberDelimiter(byte[]) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
request to define the serial number delimiter of output data
Serial Number Delimiter setting defines a set of ASCII codes that append to the output data and followed by serial number data.
- setBleKbOutputShowSerialNumber(AurParameter.Enable) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get if the serial number data is show or hide.
- setBleKbOutputSuffix(byte[]) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to define the suffix of output data.
- setBleKbOutputTerminationDelimiter(byte[]) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the termination delimiter of output data.
- setBleTransceiverInfo(String, String) - Method in class com.util.io.device.BaseDeviceInfo.Builder
-
- setBsiEpcPrefix(byte[]) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to define the EPC prefix for the BSI.
- setBuzzerEnable(AurParameter.Enable) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to enable the vibration function or not.
- setChannelId(String) - Method in class com.util.protocol.api.BaseApiCommands.Builder
-
- setCharacteristicMainNotify(UUID) - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- setCharacteristicMainWrite(UUID) - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- setCommunicationCallback(CommunicationCallback) - Method in class com.util.io.device.BaseDevice
-
- setCommunicationType(CommunicationType) - Method in class com.util.io.scanner.BaseScanner
-
This method change the Communication Type of the Scanner.
- setCompanyPrefixLength(Byte) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to define the company prefix length of EPC encoding in SGTIN format.
- setConnectionState(ConnectionState) - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- setConnectionState(ConnectionState) - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- setCustomerKey(byte[]) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to define the customer key that is used to combine GIGA-TMS key to generate GC key.
- setDataAnalysisListener(OnTransferAnalysisListener) - Method in class com.t3protocol.gnetplus.transfer.BaseBulkTransfer
-
- setDataAnalysisListener(OnTransferAnalysisListener) - Method in class com.t3protocol.gnetplus.transfer.Team3PackageTransferState
-
- setDataAnalysisListener(OnTransferAnalysisListener) - Method in interface com.t3protocol.gnetplus.transfer.Transfer
-
- setDescriptorNotify(UUID) - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- setDeviceDate(Calendar) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to set the RTC data of the device.
- setDeviceDebugCallback(DeviceDebugCallback) - Method in class com.util.io.device.BaseDevice
-
- setDeviceId(int) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to set the ID of the Device.
- setDeviceIp(String) - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- setDeviceMacAddress(String) - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- setDeviceMacAddress(String) - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- setDeviceName(String) - Method in class com.util.io.device.transceiver.ble.BleTransceiver
-
- setDeviceName(String) - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- setDeviceName(String) - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- setDevicePort(String) - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- setDeviceRomVersion(String) - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- setDeviceRomVersion(String) - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- setDeviceTime(Calendar) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to set the RTC time of the device.
- setEncodeFormat(Aur720BParameter.EncodeFormatOption) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to select the data type that is used to encode barcode to EPC (EPC encoding format).
- setEpcDataTypeSelection(HashSet<Aur720BParameter.EpcDataType>) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to set Epc data type selection that reader will be used to decode (EPC encoding format).
- setLinkFrequency(AurParameter.LinkFrequencyType) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to define the link frequency of tag backscatter (tag to reader).
- setLogTableSaved(AurParameter.Enable) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to set if it's enable to save reading RFID or barcode to internal memory.
- setMenuSelections(LinkedHashSet<Aur720BParameter.OperationMenu>) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to select the on-screen menus for operation.
- setNormalizeEpcPrefix(byte[]) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to define the prefix normalization by replacing BSI EPC prefix to be SGTIN-96 standard.
- setOnBleScanCallback(BleScanChannel.BleScanCallback) - Method in class com.util.io.scanner.channel.BleScanChannel
-
- setOnConnectionUpdatedListener(OnConnectionUpdatedListener) - Method in class com.util.io.device.transceiver.Transceiver
-
- setOnEventCompleteListener(OnEventCompleteListener) - Method in class com.t3protocol.gnetplus.event.Team3Event
-
- setOnEventReceivedListener(OnEventReceivedListener<T>) - Method in class com.t3protocol.gnetplus.event.Team3Event
-
- setOnNotifyToSendListener(BaseProtocolController.OnNotifyToSendListener) - Method in class com.util.protocol.controller.BaseProtocolController
-
- setOnNotifyToSendListener(BaseProtocolController.OnNotifyToSendListener) - Method in class com.util.protocol.controller.SyncProtocolController
-
- setOnPacketFoundCallback(PackageSeeker.OnPacketFoundCallback) - Method in class com.util.protocol.PackageSeeker
-
- setOnScanBehaviorStopCallback(OnScanStopCallback) - Method in class com.util.io.scanner.channel.ScanChannel
-
- setOnTransceivedListener(OnTransceivedListener) - Method in class com.util.io.device.transceiver.Transceiver
-
- setPcFieldVisibility(AurParameter.Visibility) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to determine the PC data is shown or not when EPC displayed in raw data format.
- setQValue(Byte) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to define the starting Q value for the number of slots in the round.
- setReadBank(MemoryBank) - Method in class com.t3protocol.gnetplus.parameters.TagPosition
-
- setRfStrength(Aur720BParameter.RfStrength) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to adjust the RF output strength
RF Strength setting is using to adjust the RF antenna output power.
- setRxDecode(AurParameter.RxDecodeType) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to set the encoding of backscattered data (tag to reader).
- setScanDebugCallback(ScanDebugCallback) - Method in class com.util.io.scanner.BaseScanner
-
- setScannerCallback(ScannerCallback) - Method in class com.aur.aur720B.Aur720BScanner
-
Set the callback of scanning AUR720B.
- setScannerCallback(ScannerCallback) - Method in class com.util.io.scanner.BaseScanner
-
- setScanTagTimeout(Byte) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to set the scan tag timeout.
- setService(UUID) - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- setSession(AurParameter.Session) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to choose a session during an inventory round.
- setSgtinFilterValue(AurParameter.SgtinFilter) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to defines the filter value of EPC encoding in SGTIN format.
- setSgtinSerialNumber(byte[]) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the serial number of EPC encoding in SGTIN format.
- setSuccessor(Team3Event) - Method in class com.t3protocol.gnetplus.event.Team3Event
-
- setTagProtectOption(Aur720BParameter.TagProtectionOption) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to specify the way of using access password to protect tag data.
- setTarget(AurParameter.Target) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get a target during an inventory round.
- setTeam3Event(Team3Event) - Method in class com.t3protocol.gnetplus.Team3GNetPlusEventParser
-
- setTimeout(int) - Method in class com.util.io.scanner.channel.BleScanChannel
-
- setTimeout(int) - Method in class com.util.io.scanner.channel.ScanChannel
-
- setTimeout(int) - Method in class com.util.io.scanner.channel.UdpScanChannel
-
- setTimeout(int) - Method in class com.util.io.scanner.channel.UsbScanChannel
-
- setTimeToEnterSleepMode(int) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to set the time to enter sleep mode.
- setTransceiverInfo(String, String, String, String) - Method in class com.util.io.device.BaseDeviceInfo.Builder
-
- setTransceiverInfo(T) - Method in class com.util.io.device.BaseDeviceInfo.Builder
-
- setUdpBroadcastInfo(int, int, ClassCode, int, int, int) - Method in class com.util.io.device.BaseDeviceInfo.Builder
-
- setUdpScanCallback(UdpScanChannel.UdpScanCallback) - Method in class com.util.io.scanner.channel.UdpScanChannel
-
- setUp() - Method in class com.t3protocol.gnetplus.command.BuzzCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.CloseTableCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.ControlActiveStatusLEDCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.EchoCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.GetAllRecordsCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.InitializeCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.OpenTableCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.QueryBatteryLevelCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.QueryDatabaseInformationCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.QueryReflectedPowerCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.QueryTableInformationCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.QueryTagRSSICommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.ReadPressedButtonCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.ShowMessageCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.TriggerVibrationCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.command.UpdateSettingChangesCommandTest
-
- setUp() - Method in class com.t3protocol.gnetplus.event.command.GetAllRecodeEventTest
-
- setUsbTransceiverInfo(UsbDevice) - Method in class com.util.io.device.BaseDeviceInfo.Builder
-
- setVibrationEnable(AurParameter.Enable) - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to enable the vibration function or not.
- setWordAddress(int) - Method in class com.t3protocol.gnetplus.parameters.TagPosition
-
- setWordLength(int) - Method in class com.t3protocol.gnetplus.parameters.TagPosition
-
- SgtinFilter - Enum in com.t3protocol.gnetplus.parameters
-
- SGTINFilterValueSetting - Class in com.t3protocol.gnetplus.command.setting
-
- SGTINFilterValueSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.SGTINFilterValueSetting
-
- SGTINFilterValueSetting(SgtinFilter) - Constructor for class com.t3protocol.gnetplus.command.setting.SGTINFilterValueSetting
-
- SGTINFilterValueSettingTest - Class in com.t3protocol.gnetplus.command.setting
-
- SGTINFilterValueSettingTest() - Constructor for class com.t3protocol.gnetplus.command.setting.SGTINFilterValueSettingTest
-
- SGTINSerialNumberSetting - Class in com.t3protocol.gnetplus.command.setting
-
- SGTINSerialNumberSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.SGTINSerialNumberSetting
-
- SGTINSerialNumberSetting(byte[]) - Constructor for class com.t3protocol.gnetplus.command.setting.SGTINSerialNumberSetting
-
- SGTINSerialNumberSetting_0x123456789012_throwErrorParameterException() - Method in class com.t3protocol.gnetplus.command.setting.SGTINSerialNumberSettingTest
-
- SGTINSerialNumberSettingTest - Class in com.t3protocol.gnetplus.command.setting
-
- SGTINSerialNumberSettingTest() - Constructor for class com.t3protocol.gnetplus.command.setting.SGTINSerialNumberSettingTest
-
- showMessage(String) - Method in class com.aur.aur720B.Aur720B
-
Request to make the device to show a given message on screen.
- ShowMessageCommand - Class in com.t3protocol.gnetplus.command
-
- ShowMessageCommand(byte, String) - Constructor for class com.t3protocol.gnetplus.command.ShowMessageCommand
-
- ShowMessageCommandTest - Class in com.t3protocol.gnetplus.command
-
- ShowMessageCommandTest() - Constructor for class com.t3protocol.gnetplus.command.ShowMessageCommandTest
-
- ShowPCFiledSetting - Class in com.t3protocol.gnetplus.command.setting
-
- ShowPCFiledSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.ShowPCFiledSetting
-
- ShowPCFiledSetting(Visibility) - Constructor for class com.t3protocol.gnetplus.command.setting.ShowPCFiledSetting
-
- ShowPCFiledSettingTest - Class in com.t3protocol.gnetplus.command.setting
-
- ShowPCFiledSettingTest() - Constructor for class com.t3protocol.gnetplus.command.setting.ShowPCFiledSettingTest
-
- ShowSerialNumberSetting - Class in com.t3protocol.gnetplus.command.setting
-
- ShowSerialNumberSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.ShowSerialNumberSetting
-
- ShowSerialNumberSetting(Enable) - Constructor for class com.t3protocol.gnetplus.command.setting.ShowSerialNumberSetting
-
- ShowSerialNumberSettingTest - Class in com.t3protocol.gnetplus.command.setting
-
- ShowSerialNumberSettingTest() - Constructor for class com.t3protocol.gnetplus.command.setting.ShowSerialNumberSettingTest
-
- SingleDataBulkTransfer - Class in com.t3protocol.gnetplus.transfer
-
- SingleDataBulkTransfer() - Constructor for class com.t3protocol.gnetplus.transfer.SingleDataBulkTransfer
-
- size() - Method in class com.util.protocol.api.BaseApiCommands
-
- start() - Method in class com.util.protocol.controller.BaseProtocolController
-
- start() - Method in class com.util.protocol.controller.SyncProtocolController
-
- startScan() - Method in class com.util.io.scanner.BaseScanner
-
Start to scan devices with a default timeout(10000ms)
or a timeout which is set through startScan(int timeout)
If a device is scanned, ScannerCallback would call didDiscoveredDevice.
- startScan(int) - Method in class com.util.io.scanner.BaseScanner
-
Set timeout and scan UHF device through this timeout.
- startScan() - Method in class com.util.io.scanner.channel.BleScanChannel
-
- startScan() - Method in class com.util.io.scanner.channel.ScanChannel
-
- startScan() - Method in class com.util.io.scanner.channel.UdpScanChannel
-
- startScan() - Method in class com.util.io.scanner.channel.UsbScanChannel
-
- StatusLedMode - Enum in com.t3protocol.gnetplus.parameters
-
- stop() - Method in class com.aur.aur720B.Aur720B
-
Request to stop the current executed event which is trigger by command.
- stop() - Method in class com.util.protocol.controller.BaseProtocolController
-
- stop() - Method in class com.util.protocol.controller.SyncProtocolController
-
- StopCommand - Class in com.t3protocol.gnetplus.command
-
- StopCommand(byte) - Constructor for class com.t3protocol.gnetplus.command.StopCommand
-
- StopCommandTest - Class in com.t3protocol.gnetplus.command
-
- StopCommandTest() - Constructor for class com.t3protocol.gnetplus.command.StopCommandTest
-
- stopScan() - Method in class com.util.io.scanner.BaseScanner
-
Stop Scanning UHF devices.
- stopScan() - Method in class com.util.io.scanner.channel.BleScanChannel
-
- stopScan() - Method in class com.util.io.scanner.channel.ScanChannel
-
- stopScan() - Method in class com.util.io.scanner.channel.UdpScanChannel
-
- stopScan() - Method in class com.util.io.scanner.channel.UsbScanChannel
-
- SuffixSetting - Class in com.t3protocol.gnetplus.command.setting
-
- SuffixSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.SuffixSetting
-
- SuffixSetting(byte[]) - Constructor for class com.t3protocol.gnetplus.command.setting.SuffixSetting
-
- SuffixSetting_21LengthByteArray_throwErrorParameterException() - Method in class com.t3protocol.gnetplus.command.setting.SuffixSettingTest
-
- SuffixSettingTest - Class in com.t3protocol.gnetplus.command.setting
-
- SuffixSettingTest() - Constructor for class com.t3protocol.gnetplus.command.setting.SuffixSettingTest
-
- SyncProtocolController - Class in com.util.protocol.controller
-
- SyncProtocolController() - Constructor for class com.util.protocol.controller.SyncProtocolController
-