- getAccessPassword() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the Access Password that is used to unlock tag data.
- getAD() - Method in class com.t3protocol.gnetplus.parameters.BatteryLevel
-
Get the AD value of battery voltage.
- getAddress() - Method in class com.protocol.format.BaseGNetPlusPackage
-
get address of package, the address is a machine ID.
- GetAllRecodeEvent - Class in com.t3protocol.gnetplus.event.command
-
- GetAllRecodeEvent(Team3Event) - Constructor for class com.t3protocol.gnetplus.event.command.GetAllRecodeEvent
-
- GetAllRecodeEventTest - Class in com.t3protocol.gnetplus.event.command
-
- GetAllRecodeEventTest() - Constructor for class com.t3protocol.gnetplus.event.command.GetAllRecodeEventTest
-
- getAllRecords() - Method in class com.aur.aur720B.Aur720B
-
Request to get all records from previously opened table.
- GetAllRecordsCommand - Class in com.t3protocol.gnetplus.command
-
- GetAllRecordsCommand(byte) - Constructor for class com.t3protocol.gnetplus.command.GetAllRecordsCommand
-
- GetAllRecordsCommandTest - Class in com.t3protocol.gnetplus.command
-
- GetAllRecordsCommandTest() - Constructor for class com.t3protocol.gnetplus.command.GetAllRecordsCommandTest
-
- getAntenna() - Method in class com.t3protocol.gnetplus.parameters.InventoryData
-
Get the antenna port number.
- getAntenna() - Method in class com.t3protocol.gnetplus.parameters.ReadTagData
-
Get the Antenna port number which has found the tag.
- getBankData() - Method in class com.t3protocol.gnetplus.parameters.ReadTagData
-
Get the bank data of the read bank.
- getBaseCommands() - Method in class com.util.protocol.api.BaseApiCommands
-
- getBleKbOutputPrefix() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the prefix of output data.
- getBleKbOutputSerialNumberDelimiter() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the serial number delimiter of output data
Serial Number Delimiter setting defines a set of ASCII codes that append to the output data and followed by serial number data.
- getBleKbOutputShowSerialNumber() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get if serial number data is show or hide.
- getBleKbOutputSuffix() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the suffix of output data.
- getBleKbOutputTerminationDelimiter() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the termination delimiter of output data.
- getBluetoothMacAddress() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to read the MAC address of Bluetooth for the device.
- getBluetoothProfile() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to select the communication protocol profile for BLE interface.
- getBluetoothProfile(BluetoothProfile) - Static method in enum com.aur.aur720B.Aur720BParameter.BluetoothProfile
-
- getBluetoothProfile(byte) - Static method in enum com.t3protocol.gnetplus.parameters.BluetoothProfile
-
- getBroadcastMessage() - Method in class com.aur.aur720B.Aur720BScanner
-
- getBroadcastMessage() - Method in class com.util.io.scanner.BaseScanner
-
- getBsiEpcPrefix() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the EPC prefix for the BSI.
- getButtonNumber(ButtonNumber) - Static method in enum com.aur.aur720B.Aur720BParameter.ButtonNumber
-
- getButtonNumber(byte) - Static method in enum com.t3protocol.gnetplus.parameters.ButtonNumber
-
- getBuzzerEnable() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request that if Buzzer is enable or not.
- getCalendar() - Method in class com.t3protocol.gnetplus.parameters.BarcodeRfidLogTableFormat
-
Get the data and time of record.
- getChannelId() - Method in class com.util.protocol.api.BaseApiCommands
-
- getCharacteristicMainNotify() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getCharacteristicMainWrite() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getCharacteristicModuleNotify() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getCharacteristicModuleWrite() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getCommandEvent(EventType) - Static method in enum com.aur.aur720B.Aur720BParameter.CommandEvent
-
- getCommandEvent(byte) - Static method in enum com.t3protocol.gnetplus.parameters.EventType
-
- getCommandEventType(byte) - Static method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.EventType
-
- getCommandSet() - Method in class com.protocol.format.BaseGNetPlusPackage
-
get code of package
- getCommandSet() - Method in interface com.util.protocol.ProtocolPackage
-
- getCommunicationType() - Method in class com.util.io.device.BaseDevice
-
- getCommunicationType() - Method in interface com.util.io.device.transceiver.BaseTransceiverInfo
-
- getCommunicationType() - Method in class com.util.io.device.transceiver.ble.BleTransceiver
-
- getCommunicationType() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getCommunicationType() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiver
-
- getCommunicationType() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- getCommunicationType() - Method in class com.util.io.device.transceiver.Transceiver
-
- getCommunicationType() - Method in class com.util.io.device.transceiver.usb.UsbTransceiver
-
- getCommunicationType() - Method in class com.util.io.device.transceiver.usb.UsbTransceiverInfo
-
- getCompanyPrefixLength() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the company prefix length of EPC encoding in SGTIN format.
- getConnectionState() - Method in class com.util.io.device.BaseDevice
-
- getConnectionState() - Method in class com.util.io.device.transceiver.ble.BleTransceiver
-
- getConnectionState() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getConnectionState() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiver
-
- getConnectionState() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- getConnectionState() - Method in class com.util.io.device.transceiver.Transceiver
-
- getConnectionState() - Method in class com.util.io.device.transceiver.usb.UsbTransceiver
-
- getCurrentCommunicationType() - Method in class com.util.io.scanner.BaseScanner
-
- getCustomerKey() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the customer key that is used to combine GIGA-TMS key to generate GC key.
- getDataLength(byte[]) - Method in class com.t3protocol.gnetplus.event.command.GetAllRecodeEvent
-
- getDataLength(byte[]) - Method in class com.t3protocol.gnetplus.event.command.ReadTagEvent
-
- getDataLength(byte[]) - Method in class com.t3protocol.gnetplus.event.command.ReadTagOnceEvent
-
- getDataLength(byte[]) - Method in class com.t3protocol.gnetplus.event.Team3BulkEvent
-
- getDataSource() - Method in class com.t3protocol.gnetplus.parameters.BarcodeRfidLogTableFormat
-
Get the data source.
- getDataSource(byte) - Static method in enum com.t3protocol.gnetplus.parameters.DataSource
-
- getDefaultChannelId() - Method in class com.util.io.device.transceiver.ble.BleTransceiver
-
- getDefaultChannelId() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiver
-
- getDefaultChannelId() - Method in class com.util.io.device.transceiver.Transceiver
-
- getDefaultChannelId() - Method in class com.util.io.device.transceiver.usb.UsbTransceiver
-
- getDescription() - Method in enum com.aur.aur720B.Aur720BParameter.EncodeFormatOption
-
- getDescription() - Method in enum com.aur.aur720B.Aur720BParameter.EpcDataType
-
- getDescription() - Method in enum com.aur.aur720B.Aur720BParameter.OperationMenu
-
- getDescription() - Method in enum com.aur.aur720B.Aur720BParameter.TagProtectionOption
-
- getDescription() - Method in enum com.aur.AurParameter.Enable
-
- getDescription() - Method in enum com.aur.AurParameter.SgtinFilter
-
- getDescription() - Method in enum com.aur.AurParameter.Visibility
-
- getDescription() - Method in enum com.t3protocol.gnetplus.parameters.Enable
-
- getDescription() - Method in enum com.t3protocol.gnetplus.parameters.EncodeFormatOption
-
- getDescription() - Method in enum com.t3protocol.gnetplus.parameters.EpcDataType
-
- getDescription() - Method in enum com.t3protocol.gnetplus.parameters.OperationMenu
-
- getDescription() - Method in enum com.t3protocol.gnetplus.parameters.Region
-
- getDescription() - Method in enum com.t3protocol.gnetplus.parameters.SgtinFilter
-
- getDescription() - Method in enum com.t3protocol.gnetplus.parameters.TagProtectionOption
-
- getDescription() - Method in enum com.t3protocol.gnetplus.parameters.Visibility
-
- getDescription() - Method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.DatabaseActionCode
-
- getDescription() - Method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.SettingCode
-
- getDescriptorNotify() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getDeviceDate() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request the RTC data of the device.
- getDeviceID() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the ID of the Device.
- getDeviceID() - Method in class com.util.io.device.BaseDevice
-
The return ID depends on the communication interface of below:
1.
- getDeviceId() - Method in interface com.util.io.device.transceiver.BaseTransceiverInfo
-
- getDeviceId() - Method in class com.util.io.device.transceiver.ble.BleTransceiver
-
- getDeviceId() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getDeviceId() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiver
-
- getDeviceId() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- getDeviceId() - Method in class com.util.io.device.transceiver.Transceiver
-
- getDeviceId() - Method in class com.util.io.device.transceiver.usb.UsbTransceiver
-
- getDeviceId() - Method in class com.util.io.device.transceiver.usb.UsbTransceiverInfo
-
- getDeviceIp() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiver
-
- getDeviceIp() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- getDeviceMacAddress() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- getDeviceName() - Method in class com.util.io.device.BaseDevice
-
- getDeviceName() - Method in interface com.util.io.device.transceiver.BaseTransceiverInfo
-
- getDeviceName() - Method in class com.util.io.device.transceiver.ble.BleTransceiver
-
- getDeviceName() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getDeviceName() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiver
-
- getDeviceName() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- getDeviceName() - Method in class com.util.io.device.transceiver.Transceiver
-
- getDeviceName() - Method in class com.util.io.device.transceiver.usb.UsbTransceiver
-
- getDeviceName() - Method in class com.util.io.device.transceiver.usb.UsbTransceiverInfo
-
- getDevicePort() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- getDeviceRomVersion() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getDeviceRomVersion() - Method in class com.util.io.device.transceiver.tcp.TcpTransceiverInfo
-
- getDeviceSettings() - Method in class com.aur.aur720B.Aur720B
-
Get the device settings.
- getDeviceTime() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the RTC time of the device.
- getEnable(Enable) - Static method in enum com.aur.AurParameter.Enable
-
- getEnable(byte) - Static method in enum com.t3protocol.gnetplus.parameters.Enable
-
- getEncodeFormat() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the selection the data type that is used to encode barcode to EPC (EPC encoding format).
- getEncodeFormat(EncodeFormatOption) - Static method in enum com.aur.aur720B.Aur720BParameter.EncodeFormatOption
-
- getEncodeFormatOption(byte) - Static method in enum com.t3protocol.gnetplus.parameters.EncodeFormatOption
-
- getEpc() - Method in class com.t3protocol.gnetplus.parameters.EpcNTidData
-
Get the EPC data
- getEpc() - Method in class com.t3protocol.gnetplus.parameters.TagRssi
-
Get the EPC code of the tag.
- getEpcDataType(EpcDataType) - Static method in enum com.aur.aur720B.Aur720BParameter.EpcDataType
-
- getEpcDataType(byte) - Static method in enum com.t3protocol.gnetplus.parameters.EpcDataType
-
- getEpcDataTypes(HashSet<EpcDataType>) - Static method in enum com.aur.aur720B.Aur720BParameter.EpcDataType
-
- getEpcDataTypeSelection() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the EPC data type selection that reader will use to decode (EPC encoding format).
- getEpcId() - Method in class com.t3protocol.gnetplus.parameters.InventoryData
-
Get the EPC ID field of EPC bank data.
- getEpcId() - Method in class com.t3protocol.gnetplus.parameters.ReadTagData
-
Get the EPC ID data of EPC bank
- getEpcPc() - Method in class com.t3protocol.gnetplus.parameters.InventoryData
-
Get the PC field of EPC bank data.
- getEpcPc() - Method in class com.t3protocol.gnetplus.parameters.ReadTagData
-
Get the PC data of EPC bank.
- getEventID() - Method in class com.protocol.format.BaseGNetPlusPackage
-
get ID of event of package
- getEventID() - Method in interface com.util.protocol.ProtocolPackage
-
- getExternalPowerGain() - Method in enum com.aur.aur720B.Aur720BParameter.RfStrength
-
- getExternalPowerGain() - Method in enum com.t3protocol.gnetplus.parameters.RfStrength
-
- getFrequency() - Method in enum com.aur.AurParameter.LinkFrequencyType
-
- getFrequency() - Method in class com.t3protocol.gnetplus.parameters.InventoryData
-
Get the frequency which is used to identify the tag.
- getFrequency() - Method in enum com.t3protocol.gnetplus.parameters.LinkFrequencyType
-
- getFrequency() - Method in class com.t3protocol.gnetplus.parameters.ReadTagData
-
Get the frequency which is used to identify the tag.
- getFrequencyAllocations() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Holds the show PC field value obtained from the getFrequencyAllocations().
- getHeader() - Method in class com.protocol.format.BaseGNetPlusSeeker
-
- getHeader() - Method in class com.util.protocol.PackageSeeker
-
- getHeaderIndex() - Method in class com.protocol.format.BaseGNetPlusSeeker
-
- getHeaderIndex() - Method in class com.util.protocol.PackageSeeker
-
- getIChannelRSSILevel() - Method in class com.t3protocol.gnetplus.parameters.ReflectedPower
-
Get the input RSSI level of I signal channel.
- getIChannelRSSILevel() - Method in class com.t3protocol.gnetplus.parameters.TagRssi
-
Get the input RSSI level of I signal channel.
- getIndex() - Method in class com.t3protocol.gnetplus.parameters.BarcodeRfidLogTableFormat
-
Get the index value of record.
- getInputPower() - Method in class com.t3protocol.gnetplus.parameters.ReflectedPower
-
Get the RSSI input power(dbm)
- getInputPower() - Method in class com.t3protocol.gnetplus.parameters.TagRssi
-
Get the RSSI input power(dbm).
- getInt() - Method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.Result
-
- getLength() - Method in class com.protocol.format.BaseGNetPlusPackage
-
get data length of package
- getLinkFrequency() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the link frequency of tag backscatter (tag to reader).
- getLinkFrequencyType(LinkFrequencyType) - Static method in enum com.aur.AurParameter.LinkFrequencyType
-
- getLinkFrequencyType(byte) - Static method in enum com.t3protocol.gnetplus.parameters.LinkFrequencyType
-
- getLogData() - Method in class com.t3protocol.gnetplus.parameters.BarcodeRfidLogTableFormat
-
Get the log data.
- getLogTableSaved() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get if it's enable to save reading RFID or barcode to internal memory.
- getMemoryBank(byte) - Static method in enum com.t3protocol.gnetplus.parameters.MemoryBank
-
- getMenuSelections() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the on-screen menus for operation.
- getMessage() - Method in enum com.aur.AurParameter.Result
-
- getMessage() - Method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.Result
-
- getMessage() - Method in enum com.util.exceptions.Error
-
- getMilliVolt() - Method in class com.t3protocol.gnetplus.parameters.BatteryLevel
-
Get the voltage value of battery.
- getNormalizeEpcPrefix() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the prefix normalization by replacing BSI EPC prefix to be SGTIN-96 standard.
- getOperationMenu(OperationMenu) - Static method in enum com.aur.aur720B.Aur720BParameter.OperationMenu
-
- getOperationMenu(LinkedHashSet<OperationMenu>) - Static method in enum com.aur.aur720B.Aur720BParameter.OperationMenu
-
- getOperationMenu(byte) - Static method in enum com.t3protocol.gnetplus.parameters.OperationMenu
-
- getOutputPower() - Method in enum com.aur.aur720B.Aur720BParameter.RfStrength
-
- getOutputPower() - Method in enum com.t3protocol.gnetplus.parameters.RfStrength
-
- getParameters() - Method in class com.protocol.format.BaseGNetPlusPackage
-
get a data of package by byte array
- getParameters() - Method in interface com.util.protocol.ProtocolPackage
-
- getPcFieldVisibility() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request if the PC data is shown or not when EPC displayed in raw data format.
- getPCFiledVisibility(Visibility) - Static method in enum com.aur.AurParameter.Visibility
-
- getPCFiledVisibility(byte) - Static method in enum com.t3protocol.gnetplus.parameters.Visibility
-
- getPercentage() - Method in class com.t3protocol.gnetplus.parameters.BatteryLevel
-
Get the percentage of battery.
- getQChannelRSSILevel() - Method in class com.t3protocol.gnetplus.parameters.ReflectedPower
-
Get the input RSSI level of Q signal channel.
- getQChannelRSSILevel() - Method in class com.t3protocol.gnetplus.parameters.TagRssi
-
Get the input RSSI level of Q signal channel.
- getQValue() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the starting Q value for the number of slots in the round.
- getReadBank() - Method in class com.t3protocol.gnetplus.parameters.ReadTagData
-
Get the memory bank that is read.
- getRecordCapacity() - Method in class com.t3protocol.gnetplus.parameters.TableInformation
-
Get the record count capacity of the table.
- getRecordCount() - Method in class com.t3protocol.gnetplus.parameters.TableInformation
-
Get the count of record which is in the table.
- getRegion() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Holds the region enumeration value obtained from the GetRegion().
- getRegion(Region) - Static method in enum com.aur.aur720B.Aur720BParameter.Region
-
- getRegion(byte) - Static method in enum com.t3protocol.gnetplus.parameters.Region
-
- getReplyTimeout() - Method in class com.util.protocol.BaseCommand
-
- getResult(Team3GNetPlusParams.Result) - Static method in enum com.aur.AurParameter.Result
-
- getResult(int) - Static method in enum com.aur.AurParameter.Result
-
- getResult(int) - Static method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.Result
-
- getResult(byte) - Static method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.Result
-
- getRfStrength() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the RF output strength
RF Strength setting is using to adjust the RF antenna output power.
- getRFStrength(RfStrength) - Static method in enum com.aur.aur720B.Aur720BParameter.RfStrength
-
- getRFStrength(byte) - Static method in enum com.t3protocol.gnetplus.parameters.RfStrength
-
- getRomVersion() - Method in class com.t3protocol.gnetplus.command.QueryFirmwareVersionTest
-
- getRssi() - Method in class com.t3protocol.gnetplus.parameters.InventoryData
-
Get the RSSI input power.
- getRssi() - Method in class com.t3protocol.gnetplus.parameters.ReadTagData
-
Get the RSSI of input power.
- getRxDecode() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the encoding of backscattered data (tag to reader).
- getRxDecodeType(RxDecodeType) - Static method in enum com.aur.AurParameter.RxDecodeType
-
- getRxDecodeType(byte) - Static method in enum com.t3protocol.gnetplus.parameters.RxDecodeType
-
- getRxSensitivity() - Method in enum com.aur.aur720B.Aur720BParameter.RfStrength
-
- getRxSensitivity() - Method in enum com.t3protocol.gnetplus.parameters.RfStrength
-
- getScanTagTimeout() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to the scan tag timeout.
- getSelectData() - Method in class com.t3protocol.gnetplus.parameters.SelectedCondition
-
- getSelectOption() - Method in class com.t3protocol.gnetplus.parameters.SelectedCondition
-
- getService() - Method in class com.util.io.device.transceiver.ble.BleTransceiverInfo
-
- getSession() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get a session during an inventory round.
- getSession(Session) - Static method in enum com.aur.AurParameter.Session
-
- getSession(byte) - Static method in enum com.t3protocol.gnetplus.parameters.Session
-
- getSetting_onParseSetting0x01_Yes() - Method in class com.t3protocol.gnetplus.command.setting.VibrationSettingTest
-
- getSetting_onParseSetting0x2C01_300() - Method in class com.t3protocol.gnetplus.command.setting.TimeToEnterStandbySettingTest
-
- getSetting_onParseSetting0xD204_1234() - Method in class com.t3protocol.gnetplus.command.setting.DeviceIdSettingTest
-
- getSgtinFilter(SgtinFilter) - Static method in enum com.aur.AurParameter.SgtinFilter
-
- getSgtinFilter(byte) - Static method in enum com.t3protocol.gnetplus.parameters.SgtinFilter
-
- getSgtinFilterValue() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the filter value of EPC encoding in SGTIN format.
- getSgtinSerialNumber() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the serial number of EPC encoding in SGTIN format.
- getStringData() - Method in class com.protocol.format.BaseGNetPlusPackage
-
get a data of package by string
- getTableCount() - Method in class com.t3protocol.gnetplus.parameters.DatabaseInformation
-
Get the table count.
- getTagProtectionOption(TagProtectionOption) - Static method in enum com.aur.aur720B.Aur720BParameter.TagProtectionOption
-
- getTagProtectionOption(byte) - Static method in enum com.t3protocol.gnetplus.parameters.TagProtectionOption
-
- getTagProtectOption() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the way of using access password to protect tag data.
- getTarget() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get a target during an inventory round.
- getTarget(Target) - Static method in enum com.aur.AurParameter.Target
-
- getTarget(byte) - Static method in enum com.t3protocol.gnetplus.parameters.Target
-
- getTcpTransceiverInfo() - Method in class com.util.io.device.BaseDeviceInfo
-
- getTid() - Method in class com.t3protocol.gnetplus.parameters.EpcNTidData
-
Get the TID data
- getTimeToEnterSleepMode() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request to get the time to enter sleep mode
Time to Enter Standby setting defines the idle time that switch device from Activity Mode to Standby Mode.
- getTransceiverInfo() - Method in class com.util.io.device.BaseDeviceInfo.Builder
-
- getTransceiverInfo() - Method in class com.util.io.device.BaseDeviceInfo
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.BluetoothProfile
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.ButtonNumber
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.CommandEvent
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.EncodeFormatOption
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.EpcDataType
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.OperationMenu
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.Region
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.RfStrength
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.StatusLedMode
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.Table
-
- getValue() - Method in enum com.aur.aur720B.Aur720BParameter.TagProtectionOption
-
- getValue() - Method in enum com.aur.AurParameter.Enable
-
- getValue() - Method in enum com.aur.AurParameter.LinkFrequencyType
-
- getValue() - Method in enum com.aur.AurParameter.LockAction
-
- getValue() - Method in enum com.aur.AurParameter.LockMemory
-
- getValue() - Method in enum com.aur.AurParameter.MemoryBank
-
- getValue() - Method in enum com.aur.AurParameter.Result
-
- getValue() - Method in enum com.aur.AurParameter.RxDecodeType
-
- getValue() - Method in enum com.aur.AurParameter.SelectOption
-
- getValue() - Method in enum com.aur.AurParameter.Session
-
- getValue() - Method in enum com.aur.AurParameter.SgtinFilter
-
- getValue() - Method in enum com.aur.AurParameter.Target
-
- getValue() - Method in enum com.aur.AurParameter.Untraceable.EPC
-
- getValue() - Method in enum com.aur.AurParameter.Untraceable.Range
-
- getValue() - Method in enum com.aur.AurParameter.Untraceable.TID
-
- getValue() - Method in enum com.aur.AurParameter.Untraceable.User
-
- getValue() - Method in enum com.aur.AurParameter.Visibility
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.BluetoothProfile
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.ButtonNumber
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.DataSource
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.Enable
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.EncodeFormatOption
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.EpcDataType
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.EventType
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.LinkFrequencyType
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.LockAction
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.LockMemory
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.MemoryBank
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.OperationMenu
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.Region
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.RfStrength
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.RxDecodeType
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.SelectOption
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.Session
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.SgtinFilter
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.StatusLedMode
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.Table
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.TagProtectionOption
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.Target
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.Untraceable.EPC
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.Untraceable.Range
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.Untraceable.TID
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.Untraceable.User
-
- getValue() - Method in enum com.t3protocol.gnetplus.parameters.Visibility
-
- getValue() - Method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.CommandCode
-
- getValue() - Method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.DatabaseActionCode
-
- getValue() - Method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.EventType
-
- getValue() - Method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.Result
-
- getValue() - Method in enum com.t3protocol.gnetplus.Team3GNetPlusParams.SettingCode
-
- getValue() - Method in enum com.util.exceptions.Error
-
- getValue() - Method in enum com.util.io.device.ClassCode
-
- getValues(HashSet<Aur720BParameter.EpcDataType>) - Static method in enum com.aur.aur720B.Aur720BParameter.EpcDataType
-
- getValues(LinkedHashSet<Aur720BParameter.OperationMenu>) - Static method in enum com.aur.aur720B.Aur720BParameter.OperationMenu
-
- getVersion() - Method in class com.t3protocol.gnetplus.parameters.DatabaseInformation
-
Get the version.
- getVibrationEnable() - Method in class com.aur.aur720B.Aur720B.DeviceSettings
-
Request that if Vibration is enable or not.
- GLog - Class in com.util.tools
-
Created by Gianni on 2017/4/6.
- GLog() - Constructor for class com.util.tools.GLog
-
- GS1CompanyPrefixLengthSetting - Class in com.t3protocol.gnetplus.command.setting
-
- GS1CompanyPrefixLengthSetting() - Constructor for class com.t3protocol.gnetplus.command.setting.GS1CompanyPrefixLengthSetting
-
- GS1CompanyPrefixLengthSetting(Byte) - Constructor for class com.t3protocol.gnetplus.command.setting.GS1CompanyPrefixLengthSetting
-
- GS1CompanyPrefixLengthSetting_0x0F_throwErrorParameterException() - Method in class com.t3protocol.gnetplus.command.setting.GS1CompanyPrefixLengthSettingTest
-
- GS1CompanyPrefixLengthSettingTest - Class in com.t3protocol.gnetplus.command.setting
-
- GS1CompanyPrefixLengthSettingTest() - Constructor for class com.t3protocol.gnetplus.command.setting.GS1CompanyPrefixLengthSettingTest
-
- GTool - Class in com.util.tools
-
- GTool() - Constructor for class com.util.tools.GTool
-