GIGATMS.UHF Help Documentation
GIGATMS.UHF Library
com.gigatms
TS100 Class
TS100 Methods
ControlBuzzer Method
GetAllSettings Method
GetBleDeviceName Method
GetBleMacAddress Method
GetBleRomVersion Method
GetBuzzerOperationMode Method
GetEventType Method
GetFilter Method
GetInventoryActiveMode Method
GetInventoryRoundInterval Method
GetIpAddress Method
GetLinkFrequency Method
GetMemoryBankSelection Method
GetOutputInterface Method
GetPostDataDelimiter Method
GetProfile Method
GetQValue Method
GetRemoteHost Method
GetRfPower Method
GetRfSensitivity Method
GetRxDecode Method
GetSessionAndTarget Method
GetTagPresentedRepeatInterval Method
GetTagPrivacyImpinjQt Method
GetTagRemovedThreshold Method
GetWiFiApDetailList Method
GetWiFiApList Method
GetWiFiMacAddress Method
GetWiFiSettings Method
KillTag Method
LockTag Method
ReadTag Method
SetAllSettings Method
SetBleDeviceName Method
SetBuzzerOperationMode Method
SetEventType Method
SetFilter Method
SetInventoryActiveMode Method
SetInventoryRoundInterval Method
SetKeyboardFormat Method
SetLinkFrequency Method
SetMemoryBankSelection Method
SetOutputInterface Method
SetOutputTagData Method
SetPostDataDelimiter Method
SetQValue Method
SetRemoteHost Method
SetRfPower Method
SetRfSensitivity Method
SetRxDecode Method
SetSessionAndTarget Method
SetTagPresentedRepeatInterval Method
SetTagPrivacyImpinjQt Method
SetTagPrivacyImpinjShortRange Method
SetTagPrivacyUntraceable Method
SetTagRemovedThreshold Method
SetWiFiSettings Method
StartInventoryEx Method
WriteEPC Method
WriteTag Method
WriteTagEx Method
Click or drag to resize

TS100SetQValue Method

Sets the starting Q value for the number of slots in the round.

Namespace:  com.gigatms
Assembly:  GIGATMS.UHF (in GIGATMS.UHF.dll) Version: 2.16.9.0 (2.16.9.0)
Syntax
Copy
public bool SetQValue(
	bool temporary,
	int qValue
)

Parameters

temporary
Type: SystemBoolean
True value specifies the changes are temporary overrides for Settings. The changes are not saved into the EEPROM and take immediate effect (no rebooting required). False value specifies the changes are permanently overrides for SettingsBase And also saved into the EEPROM. The changes will keep after rebooting the device.
qValue
Type: SystemInt32
The starting Q value for the number of slots in the round. The value ranges from 0 to 15.

Return Value

Type: Boolean
Return true if the operation is OK. Return False If the operation Is failed.
See Also