TS100 Class |
Provides APIs to control TS100 reader and access the Settings.
Inheritance HierarchyNamespace: com.gigatms
Assembly: GIGATMS.UHF (in GIGATMS.UHF.dll) Version: 2.16.9.0 (2.16.9.0)
SyntaxThe TS100 type exposes the following members.
Constructors| Name | Description | |
|---|---|---|
 | TS100 |
Initializes a new instance of the TS100 class.
|
| TS100(Int32, Int32) |
Initializes a new instance of the TS100 class with timeout and retry times.
|
Properties| Name | Description | |
|---|---|---|
 | DeviceName | Obsolete. (Inherited from UHF.) |
| ErrorCode |
Gets the error code the the result of invoking method.
(Inherited from UHF.) |
| ErrorMessage |
Gets the error reason description.
(Inherited from UHF.) |
| FrequencyLocked |
Gets a value indicating whether Frequency is locked.
(Inherited from UHF.) |
| HasBle |
Gets a value indicating whether this reader has BLE module.
(Inherited from UHF.) |
| HasBleKeyboard |
Gets a value indicating whether this reader supports BLE keyboard.
(Inherited from UHF.) |
| HasWiFi |
Gets a value indicating whether this reader has Wi-Fi module.
(Inherited from UHF.) |
| IsConnected |
Gets a value indicating the reader is connected or disconnected.
(Inherited from UHF.) |
| IsGComm | |
| PortName |
Connection string used to connect reader.
(Inherited from UHF.) |
| ProductName |
Reader Name.
(Inherited from UHF.) |
| SdkVersion |
Gets the version of SDK library (GIGATMS.UHF.dll).
(Inherited from UHF.) |
Methods| Name | Description | |
|---|---|---|
| Connect |
Connects to device using specified port name and settings.
(Inherited from UHF.) |
| ControlBuzzer |
Make reader buzzer to sound a specified beep pattern.
|
| DirectIoMultiAck |
Used by manufacture only.
(Inherited from UHF.) |
| Disconnect |
Close connection.
(Inherited from UHF.) |
| GetAllSettings |
Gets all TS100 Settings.
Any modification to the settings object will take effect after calling SetAllSettings(Boolean, Settings).
|
| GetBleDeviceName | Obsolete.
Gets the BLE peripheral name for reader.
|
| GetBleMacAddress |
Gets the reader Bluetooth MAC address.
|
| GetBleRomVersion |
Gets the firmware version running on the BLE module.
|
| GetBuzzerOperationMode |
Gets the buzzer beep condition.
|
| GetEventType |
Gets the setting of which decided data to output when inventory a tag.
|
| GetFilter |
Gets the filter used to decode of reading tag data.
|
| GetFirmwareVersion |
Gets the firmware version of the reader.
(Inherited from UHF.) |
| GetInventoryActiveMode |
Gets the operation mode of inventory a tag.
|
| GetInventoryRoundInterval |
Gets the time interval between each inventory round.
|
| GetIpAddress |
Gets the reader local IP address.
|
| GetLinkFrequency |
Gets the tag's backscatter link frequency.
|
| GetMemoryBankSelection |
Gets the selection of memory bank for tag data output.
|
| GetOutputInterface(Boolean) |
Gets the output interface.
|
| GetOutputInterface(Boolean, KeyboardSimulation, HashSetOutputInterface) | Obsolete.
Gets the data output interface.
|
| GetPostDataDelimiter |
Gets the post data delimiter for tag data keyboard output.
|
| GetProfile |
Used by manufacture only.
|
| GetQValue |
Gets the starting Q value for the number of slots in the round.
|
| GetRemoteHost |
Gets the target TCP server Ip and port that will receive inventory output.
|
| GetRfPower |
Gets the RF Power strength.
|
| GetRfSensitivity |
Gets the RF input sensitivity level.
|
| GetRxDecode |
Gets the RF data encoding(Baseband FM0 or Miller-modulated subcarrier).
|
| GetSessionAndTarget |
Gets the session flag and target used for inventory round.
|
| GetTagPresentedRepeatInterval |
Gets the time interval setting for reader to output the same tag's data with OnTagPresented or OnTagPresentedEx event.
|
| GetTagPrivacyImpinjQt |
Gets tag Impinj's QT technology settings. Only works for Impinj tag.
|
| GetTagRemovedThreshold |
Gets the time period that the reader doesn't detect to determine a tag is presented.
|
| GetWiFiApDetailList |
Gets a list of Wi-Fi access point SSID and RSSI.
|
| GetWiFiApList |
Gets a list of Wi-Fi access point names.
|
| GetWiFiMacAddress |
Gets the reader Wi-Fi MAC address.
|
| GetWiFiSettings | Obsolete.
Gets the Wi-Fi settings.
|
| InventoryTags | (Inherited from UHF.) |
| KillTag(String) |
Permanently disable a Tag
|
| KillTag(String, String) |
Permanently disable a Tag
|
| LockTag(DictionaryMemoryBank, LockAction) |
Lock or unlock specified memory.
|
| LockTag(String, DictionaryMemoryBank, LockAction) |
Lock or unlock specified memory.
|
| ReadTag(String, MemoryBank, Int32, Int32) |
Reads tag raw data from given memory bank.
|
| ReadTag(String, String, MemoryBank, Int32, Int32) |
Reads raw data from tag with specified EPC.
|
| SetAllSettings |
Sets all TS100 Settings.
|
| SetBleDeviceName | Obsolete.
Sets the BLE peripheral name for reader.
|
| SetBuzzerOperationMode |
Sets the buzzer beep condition.
|
| SetEventType(Boolean, TagPresentedEvent) |
Set which raw data and event to output when inventory a tag.
|
| SetEventType(Boolean, TagPresentedEventEx) |
Set which data and event to output when inventory a tag.
|
| SetFilter |
Sets the filter for reading tag data.
|
| SetInventoryActiveMode |
Sets the operation mode of inventory a tag.
|
| SetInventoryRoundInterval |
Sets the time interval between each inventory round. The value is ranging from 0 to 254.
|
| SetKeyboardFormat |
Sets the keyboard output format. [Prefix]Output1[FieldSeparator]Output2[Suffix][Delimiter].
|
| SetLinkFrequency |
Sets the tag's backscatter link frequency. May affect data transmission speed.
|
| SetMemoryBankSelection |
When set output data to decoded data with SetOutputTagData(Boolean, TagDecodedData), the Priority4_RawData output items is
set with this setting.
|
| SetOutputInterface(Boolean, OutputInterfaces) |
Sets the output interface.
|
| SetOutputInterface(Boolean, KeyboardSimulation, HashSetOutputInterface) | Obsolete.
Sets the data output interface.
|
| SetOutputTagData(Boolean, TagDecodedData) | Sets the output tag decoded data when inventory a tag. When a tag is inventoried, TS100 will try to decode its EPC accroding to the Filter form priority 1 to priority 4. Decode format priority is fixed, but each decode format can be selected or deselected (must select at least one format). Priority4_RawData include additional options include PC, EPC, TID. Affect Settings: EventType, Filter, BarcodeReadFormat, TagMemorySelection. |
| SetOutputTagData(Boolean, TagRawData) | Sets the output tag raw data when inventory a tag. When set to output tag raw data, TS100 will always output PC and EPC, but TID is optional. User Bank is not supported. |
| SetPostDataDelimiter |
Sets the post data delimiter for tag data keyboard output.
|
| SetQValue |
Sets the starting Q value for the number of slots in the round.
|
| SetRemoteHost(IPEndPoint) |
Sets the target TCP server Ip and port that will receive inventory output.
|
| SetRemoteHost(Int32, IPEndPoint) |
Sets the target TCP server Ip and port that will receive inventory output.
|
| SetRfPower |
Sets the RF Power strength. The value is ranging from 1 to 27.
|
| SetRfSensitivity |
Sets the RF input sensitivity level.
|
| SetRxDecode |
Sets the RF data encoding(Baseband FM0 or Miller-modulated subcarrier).
|
| SetSessionAndTarget |
Sets the session flag and target used for inventory round.
|
| SetTagPresentedRepeatInterval |
Time interval setting for reader to output the same tag's data with OnTagPresented or OnTagPresentedEx event. The value is ranging from 0 to 254 (unit is 100ms).
|
| SetTagPrivacyImpinjQt |
Sets tag Impinj's QT technology settings. Only works for Impinj tag.
|
| SetTagPrivacyImpinjShortRange |
Sets tag Impinj range settings. Only works for Impinj tag.
|
| SetTagPrivacyUntraceable |
Sets tag Gen2 untraceable.
|
| SetTagRemovedThreshold |
Sets to determine a tag is removed after reader doesn't detect in a given inventory rounds. The value is ranging from 0 to 254.
|
| SetWiFiSettings(WiFiSettings) | Obsolete.
Sets the Wi-Fi settings.
|
| SetWiFiSettings(String, String) | Obsolete.
Set target Wi-Fi Access Point SSID and password with DHCP enabled. The reader will try to connect the access point immediately.
|
| SetWiFiSettings(String, String, IPAddress, IPAddress, IPAddress) | Obsolete.
Set target Wi-Fi Access Point SSID and password with DHCP disabled. The reader will try to connect the access point immediately.
|
| StartInventory |
Starts the process of tag inventory using specified trigger source.
(Inherited from UHF.) |
| StartInventoryEx | Starts the process of tag inventory using specified tag data encoded type.> There are several settings related to inventory output include EventType, Filter, TagMemorySelection. Use SetOutputTagData(Boolean, TagDecodedData) to set all related settings at once and call StartInventory(TagPresentedType) instead. |
| StopInventory |
Stops the process of tag inventory.
(Inherited from UHF.) |
| WriteEPC(String, Byte) |
Writes EPC into tag.
Note this API will automatically calculate and write the Gen2 PC based on the EPC length.
UMI, XI, T, bits will set to 0.
AFI or Attribute byte will set to 0.
If you want to write EPC with specified T, AFI or Attribute, call WriteTag(String, MemoryBank, Int32, Byte) instead.
|
| WriteEPC(String, String, Byte) |
Writes EPC into tag with specified EPC.
Note this API will automatically calculate and write the Gen2 PC based on the EPC length.
UMI, XI, T, bits will set to 0.
AFI or Attribute byte will set to 0.
If you want to write EPC with specified T, AFI or Attribute, call WriteTag(String, String, MemoryBank, Int32, Byte) instead.
|
| WriteTag(String, MemoryBank, Int32, Byte) |
Writes raw data into tag.
|
| WriteTag(String, String, MemoryBank, Int32, Byte) |
Writes raw data into tag with specified EPC.
|
| WriteTagEx(String, SGTIN_198) |
Encode GTIN barcode to SGTIN-198 and write into tag's EPC bank.
|
| WriteTagEx(String, SGTIN_96) |
Encode GTIN barcode to SGTIN-96 format and write into tag's EPC bank.
|
| WriteTagEx(String, SGTIN_96_EAS) |
Encode GTIN barcode to SGTIN-96 + EAS format (GIGA-TMS) and write into tag's EPC bank.
|
| WriteTagEx(String, UDCTagData) |
Encode GTIN barcode to UDC format (GIGA-TMS) and write into tag's EPC bank.
|
| WriteTagEx(String, String, SGTIN_198) |
Encode GTIN barcode to SGTIN-198 and write into specified tag's EPC bank.
|
| WriteTagEx(String, String, SGTIN_96) |
Encode GTIN barcode to SGTIN-96 format and write into specified tag's EPC bank.
|
| WriteTagEx(String, String, SGTIN_96_EAS) |
Encode GTIN barcode to SGTIN-96 + EAS format (GIGA-TMS) and write into specified tag's EPC bank.
|
| WriteTagEx(String, String, UDCTagData) |
Encode GTIN barcode to UDC format (GIGA-TMS) and write into specified tag's EPC bank.
|
Events| Name | Description | |
|---|---|---|
 | OnConnectionStateChanged |
Indicates when the reader has connected or disconnected.
(Inherited from UHF.) |
| OnError |
Notify when reader error occurred.
(Inherited from UHF.) |
| OnErrorOccurred | Obsolete.
Notifies the application that an error has been detected and a suitable response is necessary to process the error condition.
(Inherited from UHF.) |
| OnTagPresented |
Indicates that the reader has inventoried a new tag.
(Inherited from UHF.) |
| OnTagPresentedEx |
Indicates that the reader reads a new tag.
(Inherited from UHF.) |
| OnTagRemoved |
Indicates that an inventoried tag is removed.
(Inherited from UHF.) |
| OnTagRemovedEx |
Indicates that an inventoried tag is removed.
(Inherited from UHF.) |
See Also