Settings Properties

Waiting time between each inventory round. Valid value ranges form 0 through 254 (0 s ~ 2.54s). Default value Is 0. It Is Not a precise inventory time interval because:

1. An inventory round may take longer or shorter because there might be a lot of tags or only one tag.

   

2. Next inventory round will start after output to client (keyboard, TCP, …) finished, even if it takes longer than the Inventory Round Interval.

   

Time interval between reader raise a OnTagPresented or OnTagPresentedEx event. This setting control how often to notify that a tag is presented, not how often the reader inventory. Valid values are 1 to 253 (0.1s ~ 25.3s), 0 (immediately) and 254 (Never repeat). Default value is 0. Immediately means reader will raise tag presented event after each inventory round as soon as possible. Never repeat means tag presented event will raise only once until the tag is considered removed and show up again.

How many times (offset by 1) of failed inventory round before the tag is considered removed and then raise tag removal event. If Tag Remove Threshold is set to 2, reader will output a tag removal event when an inventoried tag failed to inventory [2-1=1] time. Valid values are 2 ~ 254 (1 time ~ 253 time), [0 or 1] (immediately). Default value is 5. Immediately means reader will raise tag removal event and tag presented event at the same time because [1-1=0] and [0-1=-1]. This setting is used to reduce the false tag removal events.