TS100A Methods |
The TS100A type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | Connect |
Connects to device using specified port name and settings.
(Inherited from UHF.) |
| ControlBuzzer |
Make reader buzzer to sound a specified beep pattern.
(Inherited from TS100.) |
| DirectIoMultiAck |
Used by manufacture only.
(Inherited from UHF.) |
| Disconnect |
Close connection.
(Inherited from UHF.) |
| GetAllSettings |
Gets all TS100 Settings.
|
| GetBleDeviceName | Obsolete.
Gets the BLE peripheral name for reader.
(Inherited from TS100.) |
| GetBleMacAddress |
Gets the reader Bluetooth MAC address.
(Inherited from TS100.) |
| GetBleRomVersion |
Gets the firmware version running on the BLE module.
(Inherited from TS100.) |
| GetBuzzerOperationMode |
Gets the buzzer beep condition.
(Inherited from TS100.) |
| GetEventType |
Gets the setting of which decided data to output when inventory a tag.
(Inherited from TS100.) |
| GetFilter |
Gets the filter used to decode of reading tag data.
(Inherited from TS100.) |
| GetFirmwareVersion |
Gets the firmware version of the reader.
(Inherited from UHF.) |
| GetInventoryActiveMode |
Gets the operation mode of inventory a tag.
|
| GetInventoryRoundInterval |
Gets the time interval between each inventory round.
(Inherited from TS100.) |
| GetIpAddress |
Gets the reader local IP address.
(Inherited from TS100.) |
| GetLinkFrequency |
Gets the tag's backscatter link frequency.
(Inherited from TS100.) |
| GetMemoryBankSelection |
Gets the selection of memory bank for tag data output.
(Inherited from TS100.) |
| GetOutputInterface(Boolean) |
Gets the output interface.
(Inherited from TS100.) |
| GetOutputInterface(Boolean, KeyboardSimulation, HashSetOutputInterface) | Obsolete.
Gets the data output interface.
(Inherited from TS100.) |
| GetPostDataDelimiter |
Gets the post data delimiter for tag data keyboard output.
(Inherited from TS100.) |
| GetProfile |
Used by manufacture only.
(Inherited from TS100.) |
| GetQValue |
Gets the starting Q value for the number of slots in the round.
(Inherited from TS100.) |
| GetRemoteHost |
Gets the target TCP server Ip and port that will receive inventory output.
(Inherited from TS100.) |
| GetRfPower |
Gets the RF Power strength.
(Inherited from TS100.) |
| GetRfSensitivity |
Gets the RF input sensitivity level.
(Inherited from TS100.) |
| GetRxDecode |
Gets the RF data encoding(Baseband FM0 or Miller-modulated subcarrier).
(Inherited from TS100.) |
| GetSessionAndTarget |
Gets the session flag and target used for inventory round.
(Inherited from TS100.) |
| GetTagPresentedRepeatInterval |
Gets the time interval setting for reader to output the same tag's data with OnTagPresented or OnTagPresentedEx event.
(Inherited from TS100.) |
| GetTagPrivacyImpinjQt |
Gets tag Impinj's QT technology settings. Only works for Impinj tag.
(Inherited from TS100.) |
| GetTagRemovedThreshold |
Gets the time period that the reader doesn't detect to determine a tag is presented.
(Inherited from TS100.) |
| GetWiFiApDetailList |
Gets a list of Wi-Fi access point SSID and RSSI.
(Inherited from TS100.) |
| GetWiFiApList |
Gets a list of Wi-Fi access point names.
(Inherited from TS100.) |
| GetWiFiMacAddress |
Gets the reader Wi-Fi MAC address.
(Inherited from TS100.) |
| GetWiFiSettings | Obsolete.
Gets the Wi-Fi settings.
(Inherited from TS100.) |
| InventoryTags | (Inherited from UHF.) |
| KillTag(String) |
Permanently disable a Tag
(Inherited from TS100.) |
| KillTag(String, String) |
Permanently disable a Tag
(Inherited from TS100.) |
| LockTag(DictionaryMemoryBank, LockAction) |
Lock or unlock specified memory.
(Inherited from TS100.) |
| LockTag(String, DictionaryMemoryBank, LockAction) |
Lock or unlock specified memory.
(Inherited from TS100.) |
| ReadTag(String, MemoryBank, Int32, Int32) |
Reads tag raw data from given memory bank.
(Inherited from TS100.) |
| ReadTag(String, String, MemoryBank, Int32, Int32) |
Reads raw data from tag with specified EPC.
(Inherited from TS100.) |
| SetAllSettings(Boolean, Settings) |
Sets all TS100 Settings.
(Inherited from TS100.) |
| SetAllSettings(Boolean, Settings) |
Sets all TS100 Settings.
|
| SetBleDeviceName | Obsolete.
Sets the BLE peripheral name for reader.
(Inherited from TS100.) |
| SetBuzzerOperationMode |
Sets the buzzer beep condition.
(Inherited from TS100.) |
| SetEventType(Boolean, TagPresentedEvent) |
Set which raw data and event to output when inventory a tag.
(Inherited from TS100.) |
| SetEventType(Boolean, TagPresentedEventEx) |
Set which data and event to output when inventory a tag.
(Inherited from TS100.) |
| SetFilter |
Sets the filter for reading tag data.
(Inherited from TS100.) |
| SetInventoryActiveMode(Boolean, ActiveMode) |
Sets the operation mode of inventory a tag.
(Inherited from TS100.) |
| SetInventoryActiveMode(Boolean, ActiveMode) |
Sets the operation mode of inventory a tag.
|
| SetInventoryRoundInterval |
Sets the time interval between each inventory round. The value is ranging from 0 to 254.
(Inherited from TS100.) |
| SetKeyboardFormat |
Sets the keyboard output format. [Prefix]Output1[FieldSeparator]Output2[Suffix][Delimiter].
(Inherited from TS100.) |
| SetLinkFrequency |
Sets the tag's backscatter link frequency. May affect data transmission speed.
(Inherited from TS100.) |
| SetMemoryBankSelection |
When set output data to decoded data with SetOutputTagData(Boolean, TagDecodedData), the Priority4_RawData output items is
set with this setting.
(Inherited from TS100.) |
| SetOutputInterface(Boolean, OutputInterfaces) |
Sets the output interface.
(Inherited from TS100.) |
| SetOutputInterface(Boolean, KeyboardSimulation, HashSetOutputInterface) | Obsolete.
Sets the data output interface.
(Inherited from TS100.) |
| SetOutputTagData(Boolean, TagDecodedData) | Sets the output tag decoded data when inventory a tag. When a tag is inventoried, TS100 will try to decode its EPC accroding to the Filter form priority 1 to priority 4. Decode format priority is fixed, but each decode format can be selected or deselected (must select at least one format). Priority4_RawData include additional options include PC, EPC, TID. Affect Settings: EventType, Filter, BarcodeReadFormat, TagMemorySelection. |
| SetOutputTagData(Boolean, TagRawData) | Sets the output tag raw data when inventory a tag. When set to output tag raw data, TS100 will always output PC and EPC, but TID is optional. User Bank is not supported. |
| SetPostDataDelimiter |
Sets the post data delimiter for tag data keyboard output.
(Inherited from TS100.) |
| SetQValue |
Sets the starting Q value for the number of slots in the round.
(Inherited from TS100.) |
| SetRemoteHost(IPEndPoint) |
Sets the target TCP server Ip and port that will receive inventory output.
(Inherited from TS100.) |
| SetRemoteHost(Int32, IPEndPoint) |
Sets the target TCP server Ip and port that will receive inventory output.
(Inherited from TS100.) |
| SetRfPower |
Sets the RF Power strength. The value is ranging from 1 to 27.
(Inherited from TS100.) |
| SetRfSensitivity |
Sets the RF input sensitivity level.
(Inherited from TS100.) |
| SetRxDecode |
Sets the RF data encoding(Baseband FM0 or Miller-modulated subcarrier).
(Inherited from TS100.) |
| SetSessionAndTarget |
Sets the session flag and target used for inventory round.
(Inherited from TS100.) |
| SetTagPresentedRepeatInterval |
Time interval setting for reader to output the same tag's data with OnTagPresented or OnTagPresentedEx event. The value is ranging from 0 to 254 (unit is 100ms).
(Inherited from TS100.) |
| SetTagPrivacyImpinjQt |
Sets tag Impinj's QT technology settings. Only works for Impinj tag.
(Inherited from TS100.) |
| SetTagPrivacyImpinjShortRange |
Sets tag Impinj range settings. Only works for Impinj tag.
(Inherited from TS100.) |
| SetTagPrivacyUntraceable |
Sets tag Gen2 untraceable.
(Inherited from TS100.) |
| SetTagRemovedThreshold |
Sets to determine a tag is removed after reader doesn't detect in a given inventory rounds. The value is ranging from 0 to 254.
(Inherited from TS100.) |
| SetWiFiSettings(WiFiSettings) | Obsolete.
Sets the Wi-Fi settings.
(Inherited from TS100.) |
| SetWiFiSettings(String, String) | Obsolete.
Set target Wi-Fi Access Point SSID and password with DHCP enabled. The reader will try to connect the access point immediately.
(Inherited from TS100.) |
| SetWiFiSettings(String, String, IPAddress, IPAddress, IPAddress) | Obsolete.
Set target Wi-Fi Access Point SSID and password with DHCP disabled. The reader will try to connect the access point immediately.
(Inherited from TS100.) |
| StartInventory |
Starts the process of tag inventory using specified trigger source.
(Inherited from UHF.) |
| StartInventoryEx | Starts the process of tag inventory using specified tag data encoded type.> There are several settings related to inventory output include EventType, Filter, TagMemorySelection. Use SetOutputTagData(Boolean, TagDecodedData) to set all related settings at once and call StartInventory(TagPresentedType) instead. |
| StopInventory |
Stops the process of tag inventory.
(Inherited from UHF.) |
| WriteEPC(String, Byte) |
Writes EPC into tag.
Note this API will automatically calculate and write the Gen2 PC based on the EPC length.
UMI, XI, T, bits will set to 0.
AFI or Attribute byte will set to 0.
If you want to write EPC with specified T, AFI or Attribute, call WriteTag(String, MemoryBank, Int32, Byte) instead.
(Inherited from TS100.) |
| WriteEPC(String, String, Byte) |
Writes EPC into tag with specified EPC.
Note this API will automatically calculate and write the Gen2 PC based on the EPC length.
UMI, XI, T, bits will set to 0.
AFI or Attribute byte will set to 0.
If you want to write EPC with specified T, AFI or Attribute, call WriteTag(String, String, MemoryBank, Int32, Byte) instead.
(Inherited from TS100.) |
| WriteTag(String, MemoryBank, Int32, Byte) |
Writes raw data into tag.
(Inherited from TS100.) |
| WriteTag(String, String, MemoryBank, Int32, Byte) |
Writes raw data into tag with specified EPC.
(Inherited from TS100.) |
| WriteTagEx(String, SGTIN_198) |
Encode GTIN barcode to SGTIN-198 and write into tag's EPC bank.
(Inherited from TS100.) |
| WriteTagEx(String, SGTIN_96) |
Encode GTIN barcode to SGTIN-96 format and write into tag's EPC bank.
(Inherited from TS100.) |
| WriteTagEx(String, SGTIN_96_EAS) |
Encode GTIN barcode to SGTIN-96 + EAS format (GIGA-TMS) and write into tag's EPC bank.
(Inherited from TS100.) |
| WriteTagEx(String, UDCTagData) |
Encode GTIN barcode to UDC format (GIGA-TMS) and write into tag's EPC bank.
(Inherited from TS100.) |
| WriteTagEx(String, String, SGTIN_198) |
Encode GTIN barcode to SGTIN-198 and write into specified tag's EPC bank.
(Inherited from TS100.) |
| WriteTagEx(String, String, SGTIN_96) |
Encode GTIN barcode to SGTIN-96 format and write into specified tag's EPC bank.
(Inherited from TS100.) |
| WriteTagEx(String, String, SGTIN_96_EAS) |
Encode GTIN barcode to SGTIN-96 + EAS format (GIGA-TMS) and write into specified tag's EPC bank.
(Inherited from TS100.) |
| WriteTagEx(String, String, UDCTagData) |
Encode GTIN barcode to UDC format (GIGA-TMS) and write into specified tag's EPC bank.
(Inherited from TS100.) |
See Also